Получите новый launcher
Ask your agent for the latest launcher and extract it fully. The supplied guide shows hno_launcher_2.2.exe.
- Use the latest file provided by your agent.
- Do not run it inside the archive preview.
Собрать HWID
Передавайте только номер услуги, HWID1, HWID2 и полную модель платы. Поддержка не запрашивает пароль.
Перед началом
- Get the latest launcher from your agent and extract it fully
- Confirm the host motherboard's full model and revision
- Have the MAC labels from both X520-DA1 cards ready
- Prepare your own account and password; use your own code for redemption
Сопутствующие файлы
Прежние файлыСкачать установочный пакетZIP · Driver filesУстановочный пакет HMA
The existing download remains available for companion files such as network drivers. Obtain the newer HNO Launcher used in this guide from your agent, then extract it before running.
- Driver files
- Latest launcher from your agent
HMA: сбор HWID, регистрация и вход
Указывайте данные своего оборудования
Учётные записи, модели плат, MAC и HWID на снимках приведены для примера. Не копируйте их. Вводите пароли и коды только в launcher.
Откройте Login и Register
Start HNO Launcher, select the Login tab, and choose Register.
- Continue in the Create Account window.
Введите логин и пароль
Enter your chosen account in Username and set a Password.
- The interface requires 3 to 32 letters or digits, with no spaces or symbols.
- Use your own account and keep its password private.
Укажите модель платы основного ПК
Fill Motherboard with the host board's full model. On the host PC, press Win + R, enter msinfo32, and check BaseBoard Product and BaseBoard Version in System Information.
- Check the full model and revision; do not copy the screenshot example.
- The document says this lookup assumes the motherboard identifiers have not been modified. If they have, verify against the motherboard purchase record.
Отправьте данные регистрации
Check Username, Password and Motherboard, then choose Register.
- Submit the account details first; the two MAC fields become available afterward.
Перейдите к полям MAC
After registration, MAC 1 and MAC 2 become editable for the two network cards.
- Both fields are required, one for each card.
- Save HWIDs will save the binding details in the next steps.
Введите оба MAC
Read the label on each X520-DA1 and enter its address in MAC 1 or MAC 2. Use only the first group of 12 hexadecimal characters.
- Do not include the batch, model or other suffixes.
- Do not enter spaces, colons or hyphens.
- Check both physical labels; never copy the example addresses.
Сохраните HWID
Check MAC 1 and MAC 2, then choose Save HWIDs.
- Verify both addresses before saving.
Подтвердите регистрацию и привязку
HWIDs bound together with HWID 1 and HWID 2 confirms that the registration and binding shown in the guide are complete.
- Keep your own two HWID results.
- Binding and activation time are separate; see the final step for redemption.
Войдите в созданную учётную запись
Return to Login, enter the registered Username and Password, and choose Save as shown.
- Use the account you just created, not the screenshot example.
Пополните время кодом
After login, choose Redeem Serial and redeem your own code for account time.
- Obtain codes through your original agent and keep them private.