Get the latest launcher
Ask your agent for the latest launcher and extract it fully. The supplied guide shows hno_launcher_2.2.exe.
- Use the latest file provided by your agent.
- Do not run it inside the archive preview.
Collect motherboard HWID
Send only the service ID, HWID1, HWID2, and full board model. Support never asks for a login password.
Before you start
- Get the latest launcher from your agent and extract it fully
- Confirm the host motherboard's full model and revision
- Have the MAC labels from both X520-DA1 cards ready
- Prepare your own account and password; use your own code for redemption
Companion installation files
Existing companion filesDownload installation packageZIP · Driver filesHMA installation package
The existing download remains available for companion files such as network drivers. Obtain the newer HNO Launcher used in this guide from your agent, then extract it before running.
- Driver files
- Latest launcher from your agent
HMA HWID collection, registration and login
Use your own device details
Accounts, motherboard models, MACs and HWIDs in the screenshots are examples. Do not copy them. Enter passwords and redemption codes only in the launcher, not in support messages.
Open Login, then Register
Start HNO Launcher, select the Login tab, and choose Register.
- Continue in the Create Account window.
Enter an account and password
Enter your chosen account in Username and set a Password.
- The interface requires 3 to 32 letters or digits, with no spaces or symbols.
- Use your own account and keep its password private.
Enter the host motherboard model
Fill Motherboard with the host board's full model. On the host PC, press Win + R, enter msinfo32, and check BaseBoard Product and BaseBoard Version in System Information.
- Check the full model and revision; do not copy the screenshot example.
- The document says this lookup assumes the motherboard identifiers have not been modified. If they have, verify against the motherboard purchase record.
Submit registration details
Check Username, Password and Motherboard, then choose Register.
- Submit the account details first; the two MAC fields become available afterward.
Open the MAC entry step
After registration, MAC 1 and MAC 2 become editable for the two network cards.
- Both fields are required, one for each card.
- Save HWIDs will save the binding details in the next steps.
Find and enter both card MACs
Read the label on each X520-DA1 and enter its address in MAC 1 or MAC 2. Use only the first group of 12 hexadecimal characters.
- Do not include the batch, model or other suffixes.
- Do not enter spaces, colons or hyphens.
- Check both physical labels; never copy the example addresses.
Save the HWIDs
Check MAC 1 and MAC 2, then choose Save HWIDs.
- Verify both addresses before saving.
Confirm registration and binding
HWIDs bound together with HWID 1 and HWID 2 confirms that the registration and binding shown in the guide are complete.
- Keep your own two HWID results.
- Binding and activation time are separate; see the final step for redemption.
Log in with the new account
Return to Login, enter the registered Username and Password, and choose Save as shown.
- Use the account you just created, not the screenshot example.
Redeem a code for time
After login, choose Redeem Serial and redeem your own code for account time.
- Obtain codes through your original agent and keep them private.