Download and fully extract
Extract the complete ZIP locally, then run HEINO-HMA-install.bat or HEINO-HMA安装程序.bat as administrator.
- Do not run inside the ZIP
- Keep the BAT, Npcap, and driver directory together
- Choose Chinese or English from the menu
Set up and test the secondary PC
Complete secondary-PC package
DOWNLOAD NOWDownload secondary-PC packageZIP · About 60.0 MBHEINO-HMA Secondary PC Package
Includes the bilingual launcher, Npcap 1.88, X520 driver, parameter tuning, and log output. Extract the whole ZIP before use.
- About 60.0 MB
- 中文 / English
- Administrator required
Secondary-PC installation and X520 setup
Run only on the secondary PC
Confirm the X520 and optical link are installed first. The installer changes drivers and advanced NIC properties.
Use one-click installation first
New users should choose option 5 to run environment checks, Npcap, X520 driver installation, and tuning in order.
- Confirm the resource check passes
- Restart first whenever Windows requests it
- Keep the generated HEINO-HMA-install-log file
Enable Npcap compatibility mode
Accept the Npcap setup terms and enable WinPcap API-compatible Mode when the option appears.
- Installer: Secondary PC\npcap-1.88.exe
- Enable Install Npcap in WinPcap API-compatible Mode
- Return to the HEINO-HMA installer after completion
Locate X520 manually
If automatic driver setup fails, open Device Manager. The card may appear as Ethernet Controller with a warning icon.
- Hardware ID should include VEN_8086&DEV_10FB
- Right-click and choose Update driver
- Choose Browse my computer for drivers
Select the X520 driver folder
Point Windows to Secondary PC\x520_proxgb_driver and enable Include subfolders.
- Do not select an unrelated parent folder
- Continue and wait for Windows to finish
- The device should become Intel(R) Ethernet Server Adapter X520-1
Apply the X520 baseline
Use Optimize X520 in the installer, or verify the Advanced tab of X520-1 manually.
- Property names vary by driver language
- Change only Intel X520-1, not the normal onboard NIC
- These values are the delivery baseline, not general network advice
Restart and test the link
Restart the secondary PC, then verify the device and optical link. Keep the log for support.
- No warning icon and X520-1 is recognized
- Both optical endpoints remain linked
- Submit log, hardware ID, device state, and screenshots if needed
Need installation help?
For driver installation, the dedicated link, or test errors, contact HMA support.
Common installation questions
01The first boot takes a long time
Allow the full training process described by the board maker. Do not repeatedly cut power; submit indicator and log details if it exceeds that range.
02The system starts but the link is down
Check both X520 cards, drivers, SFP+ SR modules, fiber, and dedicated-link configuration separately.
03The board or BIOS must be replaced
Treat it as a new compatibility and delivery review; never reuse the old file directly.